WASTE SYSTEMS

K-FLEX SYSTEMS

WASTE SYSTEMS

WASTE HANDLING SYSTEM - Model #WHS-2006

We designed and built our state of the art Waste Systems to provide large restaurants, cafeteria facilities, medical centers and many other clients with a lower cost alternative to the common 'pulper" or disposers for waste handling and/or removal.

The most common complaints about PULPERS are;

	They are very noisy and generate significant vibration.
	Special consideration is needed to sound protect other areas.
	The very high purchase expense.
	They are large and difficult to clean under any circumstance.
	Volume of waste is reduced - but the resulting mulch is VERY HEAVY and dishroom employees struggle to move and handle the containers increasing workplace injury risk.
	Constant repairs to parts like cutting blades are VERY expensive.
	The circulating water in the waste trough is "icky".
	The machine is DANGEROUS and requires multiple "safety locks".
	"it didn't reduce our waste treatment discharge fee from the municipality at all"

Because of these complaints gathered over recent years we designed the WHS-2006 Systems to have these value engineered qualities;

	The machine is virtually SILENT!
	*A grain of rice might* get past the water extractor and go down the drain.**
	The machine is very simple to operate and very simple to clean.
	The re-circulated water in the waste trough is 90% cleaner than pulpers.
	The machine does not grind the waste to worthless mulch that has no value. **
	The footprint is similar to - but considerably less than a typical 'pulper'.
	*The purchase expense is 1/2 (one half) the cost of a typical pulper.*
	There is little or no detectable vibrations.
	*There are few parts and no elaborate safety's are not* required.**
	Cost of repair and maintenance is not even a consideration.

** BIO-FUEL technologies and research are increasing in the number of facilities and methods to make use of food wastes previously considered to only have value for composting operations.